|
If you are new to electronics and want to learn more, there is an excellent starting point here.
http://www.kpsec.freeuk.com/index.htm
* |
|
Electrical Parts—Displays, Switches, Optos, Fuses, Coils
Make a note of the parts you require and e-mail your requirements to us. Your order will be confirmed by return of e-mail along with payment details. The prices listed are most recent prices but are subject to change. Any price changes will be highlighted in your confirmation. There is NO VAT to add to the prices listed. |
|
P&P will apply and will be advised with your order confirmation. There is NO VAT to add to these prices. Enquiries and orders to |
|
Make a note of the parts you require and e-mail your requirements to us. Your order will be confirmed by return of e-mail along with payment details. The prices listed are most recent prices but are subject to change. Any price changes will be highlighted in your confirmation. There is NO VAT to add to the prices listed.
* |
|
Coils — This Section has moved to here. |
|
Stand-up Targets– Please Enquire if Not Listed Here |
|
Opto Switches and Microswitches Targets |
|
Leaf Switches |
|
Fuses |
|
LED 3mm Superbright - Suitable for use on Scared Stiff Crate for example. |
|
£0.50 |
|
LED 5mm Green - Suitable for use on Bally MPU |
|
£0.50 |
|
LED 5mm Red, Clear Casing, 8o viewing angle, 2500mcd, 650nm. Suitable replacement for Sega opto sender AND receiver. (Same part used) Equivalent to MT5000UR |
|
£0.75 |
|
Opto sender (LED) OR Receiver (Photo Transistor). Replacement elements for parts below. Also used in WPC ball troughs. |
|
£1.00 Each
|
|
A-16909 Single Photo Transistor Assembly - black mounting |
|
£8.00 |
|
A-16908 Single LED Assembly white mounting |
|
£8.00 |
|
Opto Sensor for Williams/Bally. Long legs suitable for Twilight Zone clock and most other applications. Williams Ref : 5490-13451-00 or 5490-12451-00 For Drop Targets order 5490-10159-00 |
|
£4.50 |
|
Opto Sensor for Williams/Bally. 5 Leg Flipper Opto Williams Ref : 5490-14575-00 |
|
£4.50 |
|
Microswitch with 4" Wire Arm - Bend to suit |
|
£2.50 |
|
Microswitch With 2" Flat Arm |
|
£2.50 |
|
Playfield Microswitch 5647-12693-04 |
|
£4.00 |
|
Playfield Microswitch 5647-12693-19 |
|
£4.00 |
|
Playfield Microswitch 5647-12693-21 |
|
£4.00 |
|
Playfield Microswitch for Lock area. Offset arm. 5647-12693-51 |
|
£6.00 |
|
Playfield Microswitch 5647-12693-55 |
|
£4.00 |
|
Loop Microswitch 180-5116 |
|
£5.00 |
|
Microswitch with Roller on Arm for Sega Ball Trough |
|
£4.00 |
|
Outhole and Trough Switch with Flat Blade SW-180-5009 |
|
£4.00 |
|
DPDT Interlock Switch with Service Position - Cherry 36A |
|
£4.50 |
|
01-10183 Single Drop Target Assembly Switch Mounting Bracket
|
|
£1.25 |
|
01-8240 Plate Nut for Microswitches—Flat bar with two threaded holes for - |
|
£0.50 |
|
Screw for Microswitch. Order 1/2” if screwing into plate nut, or 7/16” if directly into bracket. |
|
£0.25 |
|
|
|
|
|
Launch ball Button Assembly |
|
£11.00 |
|
Start Button Assembly |
|
£7.50 |
|
WPC 4 Test Button Assembly |
|
£11.00 |
|
Antisurge 1-1/4". Available as 0.25A 0.375A, 0.5A, 0.750A, 1A, 1.5A, 2A, 3A, 4A, 5A, 6A, 7A, 8A, 10A |
|
£0.40 each Pack of 5 £1.75 |
|
Antisurge 1-1/4" -15A, 20A |
|
£0.60 each |
|
100mA Ceramic Antisurge Fuse 1 1/4" |
|
£1.75 each |
|
25mm Fuses—All Values Fast or Slow Blow |
For WPC-95 + Later |
£0.30 each |
|
3/16A . Used on the power driver board for the 180V supply for early Bally displays. |
|
£0.65 each |
|
Fuse Holder - Breakaway - Any number of ways to 12 Maximum. |
|
£0.50 per way |
|
Fuse Clip - PCB Mount for 1-1/4" Fuses |
|
£0.25 each |
|
Current Inrush Limiter—when installed before the EMI filter, can help prevent unwanted mains tripping. Only install if you are confident with soldering and mains electricity. |
|
£1.50 |
|
A. Single Flipper Switch - Tungsten ( High Power ) contacts |
|
£5.50 |
|
B. Double Flipper Switch - Tungsten ( High Power )Contacts |
|
£6.50 |
|
C. Williams/Bally EOS End of Stroke Switch. From and including Addams Family ( Fliptronic ) applications. Ref SW-1A-194 Gold contacts. N.O. |
|
£3.00 |
|
D. Williams/Bally EOS End of Stroke Switch Up to and including Terminator II ( Non-fliptronic ) Ref 03-7811 Tungsten Contacts N.C. |
|
£3.00 |
|
E. Bally EOS NC Switch with Tungsten Contacts Ued on early solid state pins. Ref: ASE9821295 |
|
£4.00 |
|
F. Bally / Williams Secondary NO EOS. Used to power upper flippers, normally stacked with a NC EOS switch on the lower flipper. Ref: ASW-A10-45 |
|
£4.50 |
|
G. Sega EOS Switch Late Models Ref: 180-5124-00 |
|
£3.75 |
|
H. Data East/Sega EOS Early Models Ref: 180-5018-00 |
|
£3.60 |
|
A-15060 Dual Low Power Flipper Switch for Addams and HSII. For Fliptronic machines prior to using opto switches. |
|
£8.50 |
|
Lane Change Switch SW1A139 / SW1A150 |
|
£3.95 |
|
Product |
|
Price |
|
Dot Matrix Display Assembly - 128 x 32 |
|
£115.00 |
|
16 Digit Alphanumerical Display Glass 5670-12308 |
|
£52.00 |
|
Display Glass Mounting Plastic with Self Adhesive Pad |
|
£0.75 |
|
Reinforced Yellow Stand Up Oblong Target for Twilight Zone Slot Machine Target-Target has a strong steel mounting bracket and an L-section upright support.
|
|
£12.00 |
|
Green Oblong Standup Target TZ Clock A-15658-2 , A-18530-2 |
|
£8.00 |
|
Blue Oblong Standup Target A-18530-1 |
|
£8.00 |
|
A-18008 Rollover switch assembly |
|
£19.00 |
|
Square 3D Standup Target - White 12912-5 |
|
£8.00 |
|
Square 3D Standup Target - Transparent Blue 12912-10 |
|
£7.50 |
|
Square 3D Standup Target - Red 12912-23 |
|
£8.00 |
|
Oblong 3D Standup Target - Transparent Green 14604-11 |
|
£8.50 |
|
Oblong 3D Standup Target - Orange 14604-20 |
|
£9.00 |
|
Round Standup Target - Red A-14691-4 |
|
£7.50 |
|
Round Standup Target - Yellow A-14691-6 |
|
£7.50 |
|
Round Standup Target - Blue A-14691-1 |
|
|