The Pinball Specialists

Quick Jump : Lamps Flipper Parts Electronic Components Optos and switches

Fuses Mylar Rubber Rings Decal Cabinet Parts

Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS No. 2 polish.

• Requires use of NOVUS No. 2 for final finishing
• Not recommended for use on coated plastics

1. Shake well. Test in an inconspicuous area.

2. Apply NOVUS No. 3 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times.

3. Continue polishing until only fine scratches remain. Using cloth, remove all remaining polish, this is very important!

4. Using a clean cloth, apply NOVUS No. 2 in a circular motion uniformly to entire surface. Polish using light pressure until NOVUS No. 2 dries to a light haze.

5. Using a clean portion of the cloth, buff the surface clean. Follow with NOVUS No. 1 for best results.

The type of polishing cloth you use will make a difference. Ideal cloth is nonabrasive, absorbent, and lint free. To eliminate any chance of scratching, use only disposable cloths. Reusable cloths can retain abrasive particles, but you won't know for sure until the damage is done.

Use a soft cotton cloth, avoid using polyester or rayon wipes which can scratch unprotected plastic.