|
Flippers and Mechanical Assemblies |
|
Flipper Parts |
|
Mechanical Assemblies |
|
Make a note of the parts you require and e-mail your requirements to the address below. Your order will be confirmed by return of e-mail along with payment details. The prices listed are most recent prices but are subject to change. Any price changes will be highlighted in your confirmation.
Quick Jump : Lamps Flipper Parts Electronic Components Optos and switches Fuses Mylar Rubber Rings Decal Cabinet Parts Cleaning Products Parts INDEX
|
|
P&P will apply and will be advised with your order confirmation. There is NO VAT to add to these prices. Enquiries and orders to |
|
Drop Targets |
|
|
|
|
1. Shooter rod rounded knob |
£6.00 |
|
2. Outer Barrel Spring for Plunger. |
£0.75 |
|
3. Flat Washer for Plunger Rod |
£0.25 |
|
5. Shooter Sleeve |
£0.60 |
|
6. Power spring - specify colour / part number Available in White, Silver, Blue, Red, Green, or Brown. The colour refers to strength, check manual for correct strength, or specify game when ordering. |
£1.00 |
|
7. Circlip for Plunger Rod |
£0.50 |
|
8. Plunger Tip |
£0.60 |
|
Plunger Rebuild Kit - Shooter Rod, Barrel Spring, Shooter Sleeve, Power Spring of choice, Washers(3), Circlip and Plunger Tip |
£9.50 |
|
Item 9. |
1. Williams/Bally Pop Bumper Ring/Rod Assembly A-4754 |
£4.50 |
|
2. Bumper Base |
£1.50 |
|
|
3. Bumper Wafer - Blue, White, Black, Yellow, Red or Orange |
£1.50 |
|
|
4. Bumper Body |
£2.00 |
|
|
5. Spring 10-135 |
£0.50 |
|
|
6. Lamp Socket |
£2.00 |
|
|
7. #555 Lamp |
£0.18 |
|
|
8. Bumper Cap, Clear, Red, Blue or Yellow |
£2.00 |
|
|
9. A-12854 Special Ring Rod Assembly for Dr Dude, Gilligans Island, Black Rose or Party Zone |
£6.95
|
|
|
|
|
|
|
Williams/Bally Pop Bumper Ring/Rod Assembly A4754 |
£4.50 |
|
1. Mounting Bracket - Used Part Only |
£2.50 |
|
|
2. Retaining Bracket - Used Part Only |
£1.00 |
|
|
3. 01-5492 Pop Bumper Metal Armature |
£1.25 |
|
|
4. Pop Bumper Fibre Link |
£0.75 |
|
|
5. Coil Plunger - Used Part Only |
£1.00 |
|
|
6. Spring |
£0.50 |
|
|
7. 26-1200 Coil Assembly |
£11.00 |
|
|
9. Coil Sleeve
|
£0.75 |
|
|
|
Pop Bumper Spoon ( for switch assembly ) C-921 |
£1.00 |
|
|
|
|
A. A15848-Left Plunger Link and Pawl Assembly, suitable for use on Williams and Bally Flipper Assemblies from 1986 on. |
£7.50 |
|
B. A15848-Right Plunger Link and Pawl Assembly, suitable for use on Williams and Bally Flipper Assemblies from 1986 on. |
£7.50 |
|
C. 515-6518-01 Left Sega Plunger Link and Pawl Assembly. |
£13.00 |
|
D. 515-6518-00 Right Sega Plunger Link and Pawl Assembly. |
£13.00 |
|
E. 515-5051-00 Early Sega/Data East Plunger Link and Pawl Assembly. Same Part left or Right. |
£24.00 |
|
F. A-3714-3 Bally Plunger and Link Assembly |
£7.00 |
|
G. A-15847 Williams/Bally Flipper Plunger and Link New Style 1986 On. This part can also be used instead of A10656 on pre 1986 machines, as there is virtually no difference. |
£3.00 |
|
Linear Flipper Plunger S-496-217 used on early Bally flipper assemblies |
£6.50 |
|
Linear Flipper Coil End Stop A-613-115 or A-613-127 |
£6.50 |
|
|
1. Base Plate * |
£6.50 |
|
2. End of Stroke Switch ** |
£3.00 |
|
|
11. End Stop Bracket A12390 (Post 1986) |
£2.00 |
|
|
12. Flipper Coil - Specify FL11630, FL15411, FL11629 |
£10.00 |
|
|
12a. Coil Sleeve |
£0.75 |
|
|
15. Flipper Return Spring |
£0.50 |
|
|
16. Plunger Link and Pawl Assembly |
£7.50 |
|
|
17. Rubber Plug |
£1.00 |
|
|
18. Nylon Playfield Bushing 03-7568 |
£0.75 |
|
|
19&20. Bushing Nuts and bolts pack |
£1.25 |
|
|
A-15849 Complete Assembly including coil of choice* |
|
£25.00 |
|
A12111 Williams flipper End Stop Pre - 1986 |
|
£2.75 |
|
Sega Flipper End Stop 515-5086 515-5346
|
|
£2.75 |
|
Base Plate - Left or Right |
|
£6.50 |
|
Flipper Bat with Williams Logo White, Yellow, or Black. Wms no. 20-10110 |
|
£4.50 |
|
White Flipper Bat with Williams Logo and Lightning Impression White or Black Only. Limited stocks. |
|
£4.50 |
|
Flipper Bat - Old style Bally. A-3994 Yellow or white cap, screws onto metal flipper and shaft. Shaft has turned recess into which the pawl is clamped. This style flipper is broader than the above flipper.
|
|
£4.50 |
|
Mini Flipper Bat No Logo Yellow |
|
£4.00 |
|
Flipper Bushing Nuts(6) and Screws(6). Fixes bushing to baseplate. Screw also fits some playfield metal posts. |
|
£1.25 |
|
Hex Cap Screw for End Stop with Nylock 10-32 Thread |
|
£0.80 |
|
Flipper return spring - extension (addams family and later) |
|
£0.50 |
|
Conical Flipper Return Spring - compression (pre addams family) |
|
£0.60 |
|
Flipper link bush |
|
£0.95 |
|
Flipper Button Plastic Red, Yellow, White, Blue or Orange |
|
£2.50 |
|
PAL Nut for Above Pushbutton |
|
£0.50 |
|
Coil Sleeve 03-7067-2 1-1/2" offset. Commonly used on chime units, kickers, drop target assemblies. |
|
£0.75 |
|
Coil Sleeve 03-7067-1 2-3/4" offset - Used on up-kickers and special target assemblies. |
|
£0.75 |
|
Coil Sleeve 03-7067-5 2-1/16" offset. |
|
£0.75 |
|
Coil Sleeve 03-7067 1-7/8" Offset |
|
£0.75 |
|
Coil Sleeve 03-7066 1-3/4" - Commonly found on Pop Bumpers, Slingshots, Kickers and Early SS and EM flippers. |
|
£0.75 |
|
Flipper Coil Sleeve 2-3/16" 03-7066-5 |
|
£0.75 |
|
|
|
|
A. Sega Drop Target White 515-5048-1 |
£3.50 |
|
Sega Wide Drop target with Rollover Top 545-5533-01 |
£4.50 |
|
B. Bally Drop Target A3944 |
£3.50 |
|
C. Gotleib Drop Target. A-11905 |
£4.50 |
|
D. Williams/Bally Drop Target Flat 03-8749 |
£4.50 |
|
E. Williams/Bally Drop Target Wide Top 03-8750 |
£4.50 |